Description
|
Overview
|
They are made at a very large sawmill, where the sawdust is used directly on site to make the pellets.
Using the sawdust on site keeps it very fresh. The raw material is then dried at low temperature (belt dryer). This control of the raw material gives a low ash content and a high ash deformation temperature (preventing clinker).
The high hardness of the pellet thanks to high-density pressing, the low moisture content and screening before each bag is filled give a very low dust level ex works. They exceed the strictest DIN Plus and EN Plus quality standards and suit all wood pellet heating systems perfectly.
|
|
Additional information
|
Wood type
100% softwood
Certificates
DIN Plus, EN Plus A1
Calorific value
Over 4.9 kWh/kg
Moisture content
Below 8%
Ash content
Below 0.5%
Dust content
Below 0.21%
|


Reviews
There are no reviews yet.